Table of Contents
Advertisement
Printing Stamp, Page, Date/Time onto Copies (Stamp) (continued)
9.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
10.
Position original(s) FACE UP in the document feeder or FACE
DOWN on the platen glass.
For details on positioning originals, see p. 3-4 to p. 3-9.
11.
Press [START].
Wh en the fin isher / tr immer un it / paper exi t t ray capac ity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
DETAILS: Fine Adjustment Setting Screen
When FINE ADJ. OF POSITION is touched, the Fine Adjustment Setting
Screen will be displayed.
Touch TOP SIDE, BOTTOM SIDE, RIGHT SIDE, or LEFT SIDE to specify the
direction, then use the touch screen keypad or up/down arrow key to enter the
desired amount, from 0 to 50 mm. Touch OK to return to the previous screen.
Starting No. Setting Screen: Available from SET NUMBERING or WATERMARK
NUMBERING
Use the touch screen keypad or up/down arrow key to enter the desired
starting number, then touch OK to return to the previous screen.
10-55
Advertisement
Table of Contents
Troubleshooting
