Table of Contents
Advertisement
Output Mode for Machine without Finisher (continued)
3.
Touch OK on the Output Mode popup menu.
The Basic Screen will be restored with the output icon indicating the Output
mode currently selected.
Touch CANCEL on the Output Mode popup menu to restore the previous
setting.
Touch RECALL STANDARD to restore the initial setting.
See the next page for details of the output icons displayed on the Basic
Screen.
4.
Select additional copy conditions, as desired.
5.
Enter the desired print quantity from the control panel keypad.
The exit tray capacity is 120 sheets. Be sure that the capacity is not exceeded.
See p. 3-10 for details on setting print quantity.
6.
Position original(s) FACE UP in the document feeder or FACE
DOWN on the platen glass.
See p. 3-4 to p. 3-9 for details on positioning originals.
7.
Press [START].
Press [STOP] to suspend the scanning or printing job. See p. 3-13 for details.
When the paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise,
mishandled paper will occur.
3-43
Advertisement
Table of Contents
Troubleshooting
