Table of Contents
Advertisement
Copying Non-Standard Size Originals (Original Form) (continued)
3.
Touch the desired size key.
When selecting FULL AREA on the Non STD size mode menu, the copier
scans the full area of the platen glass and copies with the paper size or
magnification ratio currently selected.
4.
Touch OK on the popup menu to complete the setting.
The popup menu will disappear.
5.
Touch OK to complete the setting and return to the Basic Screen.
6.
Load copy paper.
• To load tabbed copy paper in the Multi-sheet bypass tray, specify the paper
type as Tab paper. See p. 3-18 to p. 3-21.
To load tabbed copy paper in any other tray, specify the paper type as Tab
paper in the Key Operator mode. See p. 14-21 to p. 14-22.
• For the procedure of tabbed copy paper supply, see p. 2-30 to p. 2-32.
7.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
8.
Position original(s) FACE UP in the document feeder, or FACE
DOWN on the platen glass.
• See p. 3-4 to p. 3-9 for details on positioning originals.
• Use RADF store mode (p. 3-33 to p. 3-34) when the original count exceeds
100.
9.
Press [START].
Wh en the fin isher / tr immer un it / paper exi t t ray capac ity is
exceeded due to the print quantity selected, remove the copied sets
as they exit; otherwise, mishandled paper will occur.
9-5
Advertisement
Table of Contents
Troubleshooting
