Table of Contents
Advertisement
Inserting Images into Printed Sets (Image Insert) (continued)
3.
Use the control panel keypad to enter the page number.
Touch SET after each entry to move to the next key.
When setting more than 15 locations, touch the arrow key to move to the
next page.
To clear an incorrect entry, touch DELETE. The entered page number will
be deleted.
DETAILS: Entering Page Numbers
For example, if insertion locations are [2/2/6], scanned platen images will be
inserted as follows:
The first scanned platen image will be inserted after page 2.
The second scanned platen image will be inserted directly after the first
scanned Image insertion.
The third scanned platen image will be inserted after page 6.
NOTES:
• When a page number is larger than the total original count, a sheet is
inserted as the last page.
• Insertions occur in sequence, even if page numbers are entered out of
sequence.
• Entering the same page number twice will insert two sheets at that location.
Touch Booklet on the Image Insertion No. Setting Screen to use this function.
4.
When all page number entries are made, touch OK.
The Application Selection Screen will be restored.
5.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
The STORE key on the Basic Screen appears highlighted to show that the
Store mode is automatically selected.
6.
Enter the desired print quantity from the control panel keypad.
See p. 3-10 for details on setting print quantity.
10-18
Advertisement
Table of Contents
Troubleshooting
