Table of Contents
Advertisement
Transmitting/Editing Machine Setting File (continued)
The data format cannot be changed from "TAB separated."
Confirm that the radio button heading "Save this file to disk" is marked in
the File Download dialog box, then click on [OK].
In the dialog box, designate the folder for saving the machine setting file,
then click on [Save].
The file name is automatically assigned as described below. Select the data to
be exported, changing the name if desired.
• ekc_tab.txt (E.K.C. data)
• ip_email.txt (E-mail data of Scan Transmission Setting data)
• ip_hdd.txt (HDD data of Scan Transmission Setting data)
• ip_ftp.txt (FTP data of Scan Transmission Setting data)
DETAILS: Error Message
The file cannot be accessed when the machine is operating. If an error
message is displayed, try again to save the file after the current machine
operation is completed.
A dialog box will be displayed when the saving operation is completed.
Click on [Close].
11-25
Advertisement
Table of Contents
Troubleshooting
