Tcp Test Configuration Example - 3Com 4510G Configuration Manual

<DeviceB> system-view
[DeviceB] snmp-agent sys-info version all
[DeviceB] snmp-agent community read public
[DeviceB] snmp-agent community write private
2) Configurations on Device A.
# Create an SNMP query test group and configure related test parameters.
<DeviceA> system-view
[DeviceA] nqa entry admin test
[DeviceA-nqa-admin-test] type snmp
[DeviceA-nqa-admin-test-snmp] destination ip 10.2.2.2
[DeviceA-nqa-admin-test-snmp] quit
# Enable SNMP query test.
[DeviceA] nqa schedule admin test start-time now lifetime forever
# Disable SNMP query test after the test begins for a period of time.
[DeviceA] undo nqa schedule admin test
# Display results of the last SNMP test.
[DeviceA] display nqa result admin test
NQA entry(admin admin, tag test) test results:
Destination IP address: 10.2.2.2
Send operation times: 1
Min/Max/Average round trip time: 50/50/50
Square-Sum of round trip time: 2500
Last succeeded probe time: 2007-11-22 10:24:41.1
Extended results:
Packet lost in test: 0%
Failures due to timeout: 0
Failures due to disconnect: 0
Failures due to no connection: 0
Failures due to sequence error: 0
Failures due to internal error: 0
Failures due to other errors: 0
Packet(s) arrived late: 0
# Display the history of SNMP tests.
[DeviceA] display nqa history admin test
NQA entry(admin admin, tag test) history record(s):
Index Response
1 50

TCP Test Configuration Example

Network requirements
Use the NQA TCP function to test the time for establishing a TCP connection between Device A and
Device B. The port number used is 9000.
Receive response times: 1
Status Time
Timeout 2007-11-22 10:24:41.1
22-31