Printer Unit: Reviewing The Card Lamination Module - Fargo HDP5000 User Manual

High definition card printer/encoder

Hide thumbs Also See for HDP5000:

Table of Contents

RESTRICTED USE ONLY

Fargo Electronics, Inc.

Printer Unit: Reviewing the Card Lamination Module

Danger: The Printer's Transfer Roller can reach temperatures exceeding 350° F

(175° C). Use extreme caution when operating the Laminator. Never touch the Transfer

Roller unless the Printer has been turned off for at least 20 to 30 minutes.

Select Printer models support the attachment of an optional Card Lamination Module. This

Module can be ordered pre-installed on your Printer from the factory or can be ordered

separately as a field upgradeable Module.

HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.3)