Reviewing The Card Count Self-Test; Reviewing The Magnetic Test Option - Fargo HDP100 User Manual

RESTRICTED USE ONLY

Reviewing the Card Count Self-Test

Step Procedure
1 Use this card to view counts for Card Count (CC), Pass Count (PC), Transfer
Count (TC) and Lamination Count (LC).

The Card Count is the total number of cards the Printer has produced. Pass
Count is the total number of print passes made by the Printhead. (Note: A
pass is measured each time a single Ribbon panel is printed or passes
beneath the Printhead.)

The Transfer Count is the total number of times the Printer transfers an
image to a card.

Reviewing the Magnetic Test option

Step Procedure
1 Use this option only applies if a Magnetic Encoding Module is installed in the
Printer. (Note: The Printer will feed, encode and eject a card. Be sure to have
high coercivity cards installed when running this test.)
HDP100 High Definition Card Printer/Encoder User Guide (Rev. Beta)
Fargo Electronics, Inc.
79