Downloading System Software - Allied Telesis AT-FH812u User Manual

Downloading
System Software
Using TFTP Protocol to Download over the Network.
Download menu to load software updates into the hub. The download file should
be an atiflash.bin binary file from Allied Telesyn; otherwise the agent will not
accept it. The success of the download operation depends on the accessibility of
the TFTP server and the quality of the network connection. After downloading the
new software, the agent will automatically restart itself. Parameters shown on this
screen are indicated in Figure 14 and Table 13.
------------------------------------------------------------
<Ctrl-F> forward a char, <Ctrl-B> backward a char.
------------------------------------------------------------
Table 13 TFTP Download Parameters Defined
Parameters
Download Server IP
Download Filename
Download Mode
Start TFTP Download
TFTP Download
Download Server IP : 10.1.113.21
Download filename
Download Mode
Start TFTP Download
<APPLY> <OK>
The IP address of TFTP server.
Figure 14 TFTP Download Parameters
Description
IP address of a TFTP server.
The atiflash.bin binary file to download.
You can download to permanent flash ROM or
temporary storage in RAM (for test purposes).
However, if you download to temporary memory, this
firmware will be lost upon power off. To update new
agent firmware for permanent use, it must be
downloaded to flash ROM.
Issues request to TFTP server to download the
specified file.
AT-FH812u and AT-FH824u User's Guide
Use the TFTP
: tomcat.bin
: Upgrade Flash & Reboot
<CANCEL>
21