Displaying Hub Statistics - Allied Telesis AT-FH812u User Manual

Displaying Hub
Statistics
Use the Hub Statistics screen to display key statistics for each hub in the stack.
Overall statistics on the traffic passing through each hub are displayed. See
Figure 17 and Table 18.
------------------------------------------------------------
Refresh Statistics
Hub
ID Frames Bytes
-----------------------------------------------------------------
1. 1 1026288
Refresh current statistics screen.
Use TAB or Cursor keys to move, <Enter> to confirm.
------------------------------------------------------------
Parameters
Refresh Statistics
Auto-Refresh Statistics
Hub ID
Position
Frames
Bytes
Collisions
Alignment Errors
CRC Errors
Total Errors
Hub Statistics
Collisions
267 0
<PREV_PANEL>
Figure 17 Hub Statistics Screen
Table 18 Hub Statistics Parameters
Description
Refresh the displayed statistics.
Refresh statistics at the interval specified in Console
Configuration.
Hub identifier within the stack.
The physical position in the stack (as determined by its
position from the top of the stack).
Number of frames passing through this device.
Number of bytes passing through this device.
Number of simultaneous node transmissions detected by this
device.
Number of mis-synchronized data packets detected by this
device.
Number of Ethernet Cyclic Redundancy Check errors detected
by this device.
Total number of errors, including FCS, alignment,
FramesTooLong, ShortEvents, LateEvents, Jabber, and
DataRateMismatches detected on this device.
AT-FH812u and AT-FH824u User's Guide
Auto-Refresh Statistics
Aligment CRC
Errors Errors
0 1391289
Total
Errors
<RESET>
25