Using The Serial Port To Download Via Out-Of-Band - Allied Telesis AT-FH812u User Manual

AT-FH812u and AT-FH824u Software
Using the Serial
Port to
Download via
Out-of-Band
22
Use the XModem Download command to update available software in the hub.
The download file should be the atiflash.bin binary file from Allied Telesyn;
otherwise the agent will not accept it. This command specifies direct download
from an attached device via the serial port. You may download using any terminal
emulation program that can transmit binary files using XModem protocol. The
parameters shown in this screen are indicated in Figure 15 and Table 14.
------------------------------------------------------------
Download Mode
Use ESC for help. Use arrow keys to move.
Use TAB or Cursor keys to move, <Space> to select.
------------------------------------------------------------
Figure 15 XModem Download Parameters
Table 14 Xmodem Download Parameters Defined
Parameters
Download Mode
Start Download
To start the download process, use XModem protocol and select a file. Start
sending the file from your computer by specifying send or upload file with the
XModem facility. The terminal emulation program will display the progress of the
download process. After downloading the new software, the agent will
automatically restart itself.
XMODEM Download
: Upgrade DRAM & Reboot
Start XMODEM Download
Description
You can download to permanent flash ROM or
temporary storage in RAM (for test purposes).
However, if you download to temporary memory, this
firmware will be lost upon power off. To update new
agent firmware for permanent use, it must be
downloaded to flash ROM.
Waits to receive specified file from the TFTP server.