Configuring Your System With The Console Interface - Allied Telesis AT-FH812u User Manual

AT-FH812u and AT-FH824u Software
Configuring
Your System with
the Console
Interface
4
Once a direct connection to the serial port or a Telnet connection is established,
the login screen for the on-board configuration program appears, as shown in
Figure 1.
------------------------------------------------------------
FH824U/FH812U Dual-Speed Intelligent Hub User Interface
V0.09 06-08-98 (C) Copyright Allied Telesyn International, Corp.
Press <Ctrl+E> to exit this program.
------------------------------------------------------------
Figure 1 Login Screen for On-Board Configuration Program
When you first log into the configuration program, the default user names are
admin and guest and passwords are null. The administrator has Read/Write access
to all configuration parameters and statistics. A guest has Read Only access to the
management program. Type admin for the user name and press <Enter> for the
password to open the Main Menu.
Be sure to define a password, record it and put it in a safe place. To define your
password, select User Passwords from the Main Menu and enter a password. Note
that passwords can consist of up to 14 alphanumeric characters and are not case
sensitive.
Configuration parameters are described in the following section.
A user is allowed three attempts to enter the correct password; on the third
failed attempt the current connection is terminated.
User Name : admin
Password : *****
Note