At-Fh812U And At-Fh824U Software; Introduction - Allied Telesis AT-FH812u User Manual

AT-FH812u and AT-FH824u Software

Introduction

The AT-FH812u and AT-FH824u hub (and the connected stack) is managed
through a direct console or modem connection to the AT-FH801u network
management agent module's serial port, using Telnet to access the hub over the
network, a standard browser to access the Agent Module's embedded web agent,
or with SNMP-based network management software. Once you connect a terminal
or PC to the serial port on the hub, you can perform the following tasks:
Enable/disable any port
Set the communication mode for any port
Configure SNMP parameters
Select RMON options
Configure port security
Display system information or statistics
Download system firmware
Restart the system
1