Displaying Repeater Statistics - Allied Telesis AT-FH812u User Manual

AT-FH812u and AT-FH824u Software
Displaying
Repeater Statistics
24
Use the Repeater Statistics screen to display statistics for the 10 Mbps and 100
Mbps stack segments. These values can be used to indicate the approximate
loading for each segment, as shown in Figure 16 and defined in Table 17.
------------------------------------------------------------
Refresh Statistics
Frames
Bytes
Collisions
Aligment Errors
CRC Errors
Total Errors
Use TAB or Cursor keys to move, <Enter> to confirm.
------------------------------------------------------------
Parameters Description
Refresh Statistics Refresh the displayed statistics.
Auto-Refresh Statistics Refresh statistics at the interval specified in Console Configuration.
Frames Number of frames passing through this device.
Bytes Number of bytes passing through this device.
Collisions Number of simultaneous node transmissions detected by this
device.
Alignment Errors Number of mis-synchronized data packets detected by this device.
CRC Errors Number of Ethernet Cyclic Redundancy Check errors detected by
this device.
Total Errors Total number of errors, including FCS, alignment, FramesTooLong,
ShortEvents, LateEvents, Jabber, and DataRateMismatches
detected on this device.
Repeater Statistics
Reset Counter
10M Segment
: 1391288
: 1
: 267
: 0
: 0
: 6219780
<PREV_PANEL>
Refresh current statistics screen.
Figure 16 Repeater Statistics Screen
Table 17 Repeater Statistics Parameters
Auto-Refresh Statistics
100M Segment
1391288
0
0
0
0
6219780