Cable Assembly - Stairmaster STEPMILL 7000 Owner's Manual

11. Complete the reassembly of the machine by performing steps 1- 4 in
reverse order.

CABLE ASSEMBLY

1. Remove the right side cover.
2. Remove the console and unplug the console cable and the Polar
rate cable from the back of the console (See Drawing Below). Unplug the
plastic connectors at the console cable/main cable junction.
3. Hold the console connector and pull the console cable up and out of the
handrails.
4. Reinstall the console cable by pushing the white plastic connector end
down through the handrails. Do not connect the console, Polar heart rate,
and the main cables.
5. Remove the main cable from the wire saddles.
PARTS REMOVAL AND REPLACEMENT
Console
Console Cable/
Main Cable Junction
5 X Wire Saddle
Main Cable
Relay Board
21769
4 X Tywrap
Tywrap
25233
Polar Cable Assy, 12"
26143
Receiver, Polar
®
Plug-in
25165
®
heart
Console Cable
21416
Page 49