Stairmaster STEPMILL 7000 Owner's Manual page 26

TO REDUCE THE RISK OF ELECTRICAL SHOCK AND FIRE AND TO PREVENT SEVERE
DAMAGE TO THE MACHINE, USE ONLY THE POWER SUPPLY APPROVED FOR USE
WITH THIS EQUIPMENT. IN ADDITION, YOUR MACHINE MUST BE
9. Connect the AC power cord to the AC wall outlet. Refer to the "Grounding
Instructions" section of the Manual if the AC wall outlet does not
accept a three-prong plug.
10. Watch the console. It should produce an audible sound when plugged
in and then display a simulated EKG signal after the software revision
level scrolling message. If it does not, unplug the power supply and then
plug it back in. If the sound and/or the display are still not present, contact
the Customer Service Department at (800) 331-3578. International
customers should call their local distributor; refer to the Appendix for the
phone number of the office nearest you.
11. When the console displays the simulated EKG signal, your Stepmill
7000 PT exercise system is in the ATTRACT mode.
12. The console is set at the manufacturing facility to English language
prompts and English units. While the console is in the ATTRACT mode, you
can set the console for foreign language prompts or metric units. To
change the language of the prompts, press [+ INCREASE], [7], [4], [2], [4],
[ENTER]. Press the code number corresponding to the desired language
according to Table 4 and then [ENTER].
To change the console to metric units, press [+ INCREASE], [9], [7], [6],
[0], [ENTER]. Press [1], [ENTER] to set the console to metric units. Press [0],
[ENTER] to set the console to English units.
13. Custom-length DC cables and other accessories are available. Refer to the
Appendix for the phone number of the office nearest you.
INSTALLATION INSTRUCTIONS
!
WARNING
PROPERLY GROUNDED.
®
Page 5