Signal Information; Using The Menus - Ingenico EFT930G User Manual

7.

Signal Information

EFT930GCC:
The signal icon represents the strength of the GSM/GPRS mobile signal. The fewer
bars indicated represents poorer network strength.
Your terminal may not be able to communicate with the acquirer if the signal
is very poor. The network name shown next to the signal icon, indicates which
network the terminal is communicating by.
This symbol indicates that the network and SIM card are fitted.
When GPRS is green it shows that the terminal is connected to the network.
EFT930BCC:
If this symbol is displayed in BLUE, the handset is in range of the base unit and
can be used safely.
If this symbol is displayed in RED, the handset is out of range of all the base unit
and cannot be used.
8.

Using the Menus

The Transaction Menu enables you to perform a transaction on the terminal.
At the READY prompt press the MENU button.
The first option on the list will be highlighted.
The actual options shown may differ from those shown here.
NOTE: Only three options can be displayed on the terminal screen at any one time. Use the arrow
buttons to view the available options.
Press the GREEN ENTER button to select a highlighted option. The terminal will return to the READY
display if no option is selected within 30 seconds.
The System Menu enables you to perform an administration function on the terminal. Select the
System Menu by following the instructions below.
At the READY prompt press the MENU button until the System Menu is displayed. Other menu
options may appear before/after depending on your configuration.
Use the up and down arrow buttons to view the available
options and press ENTER to make your selection when the
required option is highlighted.
Throughout the transaction flows in this guide, all your
instructions are denoted by this unshaded display.
Page 8
TRANSACTION MENU
Refund
Sale
Purch. with Cashback
SYSTEM MENU
Totals
Print Function Codes
Select Function