Installing The Terminal - Ingenico EFT930G User Manual

4.

Installing the Terminal

• Ensure the mains supply is connected to the terminal and switched off.
• Connect the telephone/network cables to the base unit, before connecting them to external
sockets.
• Ensure you have your Merchant ID to hand. This can be found on your Welcome Letter.
• Place the terminal handset onto the base if you have not already done so.
Dual Comms Mode
You should use the
option and then press ENTER to select that option. If using a
EFT930G the display will show GRPS Network twice.
Now switch on the mains supply. The terminal will display
this screen, press ENTER and a number of additional screens
will be displayed while the handset assigns to the base.
At this screen press the GREEN button and the installation
process will continue.
ONLY APPLIES IF TRANSMITTING VIA TELEPHONE LINE:
If your terminal is connected via a direct line, press the
YELLOW button to select NO.
If your phone line is connected to a switchboard/PABX, press
the GREEN button to select YES.
If you selected YES, key in the number used to get an
outside line (often 9) and press the GREEN button.
If your telephone line uses the 1571 or call waiting
function, press the GREEN button. NOTE: if you select no here
and you do use these functions, the terminal will be unable
to dial out for authorisations when a call message is waiting.
Key in your merchant number and press the GREEN button.
The terminal will start to dial the Host computer and a
number of communication messages will be displayed.
The terminal may contact card acquirers.
Further communications messages will be displayed. An installation report will then be printed
displaying the card types that your terminal will accept.
Page 6
arrows to highlight the required
Connection Method
Telephone <PPP>
LOCAL NETWORK
PLACE TERMINAL ON A BASE
WITH A PHONELINE and press
ENTER
Terminal Installation
Plug in Phone Line
and then press ENTER
Dial Prefix Required?
Enter = YES Clear = NO
Key in the Number used to get an
Outside Line
and then press ENTER
Does the Tel. Line have Call
Waiting or 1571
Enter = YES Clear = NO
Terminal Installation
Key in Merchant No.
and then press Enter