The most important
Ingenico EFT930 functions
Prerequisites
All operations described in this guide are related to the payment application (ep2). It is activated automatically in
case of terminal restart or usage of the card. If it is inactive, it can be activated this way:
1.
Push the <F> button. "Functions" option is activated.
2.
Push <1> or the <green> button. "EP2" option is activated.
Purchase/Payment
1.
Push the <F> button. "Transactions" option is activated.
2.
Push <1> or the <green> button. "Payment" option is activated.
3.
Enter the amount and confirm with the <green> button.
The amount is separated (e.g. euros/cents) with a comma.
4.
Depending on the type of card, the card must be slipped through the magnetic
swipe reader, inserted into the chip card reader or tapped to the contactless
reader. If the customer uses the wrong reader for his or her card, that person is
instructed to use the proper reader.
5.
The amount is displayed for the customer to read. When using a card with an
associated PIN, the customer is instructed to enter the PIN code (4 to 12 digits)
and confirm with the <green> button.
When using a card without a PIN, only the amount must be confirmed.
The transaction can be interrupted by pressing the <red> button.
6.
OPTIONAL: if CashBack is enabled and supported by card, cashback amount would
be prompted. Amount can be entered (not greater than 200 PLN) or left empty and
confirmed with the <green> button.
1 EP2
or
(green button)
1 Payment
or
(green button)
Amount
(green button)
PIN
(green button)
CashBack amount
(green button)
1
Need help?
Do you have a question about the EFT930 and is the answer not in the manual?
Questions and answers