Technical Specifications - Owon PDS8102T User Manual

User Manual of OWON Color Mixed Signal Digital Storage Oscilloscope

8. Technical Specifications

Unless otherwise specified, the technical specifications applied are applicable to the
probe with the attenuation switch setting 10X and the PDS series digital oscilloscope.
Only if the oscilloscope fulfill the following two conditions at first, can these
specification standards be reached.
This instrument should run for more than 30 minutes continuously under the
specified operating temperature.
If the change range of the operating temperature is up to or exceeds 5 , open the
system function menu and execute the "Auto-calibration" procedure.
All specification standards can be fulfilled, except one(s) marked with the word
"Typical".
Performance Characteristics
Bandwidth
Channel
Acquisition：
Input：
Horizontal
System
Mode
Sample rate (real time)
Input coupling
Input impedance
Probe attenuation factor
Max. input voltage
Bandwidth limit
Channel isolation
Time delay between
channel(typical)
Sampling rate range
Instruction
100MHz----PDS8102T
200MHz----PDS8202T
2 + 1 (External)
Normal, Peak detect, Averaging
1GS/s half channel*, 500MS/s each
channel---- PDS8102T
2GS/s half channel*, 1GS/s each
channel---- PDS8202T
DC, AC , Ground
1MΩ±2%，in parallel with 15pF±5pF
1X，10X，100X，1000X
400V (PK-PK) （DC + AC PK-PK）
20MHz、100MHz
50Hz: 100 : 1
10MHz: 40 : 1
1S/s~1GS/s half channel*,
1S/s~500MS/s each channel
1S/s~2GS/s half channel*,
1S/s~1G S/s each channel
77
℃
150ps
---- PDS8102T
----PDS8202T