Slope Trigger - Owon PDS8102T User Manual

User Manual of OWON Color Mixed Signal Digital Storage Oscilloscope

Slope Trigger

Slope trigger sets the oscilloscope as the positive/negative slope trigger within the
specified time.
The Slope Trigger Menu is shown as
Slope Trigger menu list
MENU SETTING INSTRUCTION
CH1
Source
CH2
Mode
Slope
When
Settings 24ns~10s
High level
Low level
Slew rate
Auto
Trigger Normal
mode Single
100ns～
Holdoff
10s
Holdoff
Reset
Fig. 5-22
.
Fig. 5-22 Slope Trigge menu
elect CH1 as the trigger source.
S
Select CH2 as the trigger source.
Set slope condition
Turn "TRIG LEVEL"knob to set slope time
Turn"TRIG LEVEL"knob to set the
Turn "TRIG LEVEL"knob to set
Slew rate=(
High level- Low level)/ Settings
Acquire waveform whatever detect trigger condition or not
Only acquire waveform when match trigger condition
Only acquire waveform for single time when detect trigger
condition then stop
Turn "TRIG LEVEL" knob to set time slot before another
trigger event
Reset hold time to 100ns
40
High level
Low level