How To Use Autoscale - Owon PDS8102T User Manual

User Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
Carry out the following operation steps for the Freq cursor measurement :
1. Press CURSOR and recall the CURS MEAS menu.
2.
Press F1 and choose Freq for Type, with two purple dotted lines displayed along the vertical
direction of the screen indicating the corrersponding Cursor 1 and Cursor 2
3. Adjust the positions of CURSOR1 and CURSOR2 according to the measured
waveform, with the period and frequency of Cursor1 and Cursor 2 displayed in the
increment window. The current position of Cursor1 is displayed in the Cursor1
window and that of Cursor2 is displayed in the Cursor2 window (see Fig.5-50).

How to use Autoscale

The function is applied to follow-up signals automatically even if the signals change at
any time. Autoscale enables the instrument to set up trigger mode, voltage division and
time scale automatically according to the type, amplitude and frequency of the signals.
The menu is as follows:
Function Menu
Autoscale
Mode
HORI—VERT
Fig.5-50 wave of Freq cursor measurement
Setting Instruction
OFF Turn off
ON Turn on
Vertical Follow-up and adjust vertical scale without changing
horizontal setting.
Horizontal Follow-up and adjust horizontal scale without changing
vertical setting.
Follow-up and adjust the vertical and horizontal settings.
Autoscale.
Autoscale.
64