How To Use Executive Buttons - Owon PDS8102T User Manual

User Manual of OWON Color Mixed Signal Digital Storage Oscilloscope
6. Turn off the submenu at the Autoscale menu, the Autoscale is off and turn on the
submenu still enters into the function.
7. When video triggering, the horizontal time scale is 50us. If one channel is showing
edge signal, the other channel is showing video one, the time scale refers to 50us as
video one as standard.
8.
While the Autoscale is working,below settings will be made forcibly:
(1) The unit will switch from non-main time base to main time base status.
(2) The unit will siwtch to Peak detection menu while in the state of
sampling mode.

How to Use Executive Buttons

AUTOSET
This button is used for the automatic setting of all control values of the instrument to
generate the waveform suitable for observation. Press the AUTOSET button and the
oscilloscope will perform the fast automatic measurement of the signal.
The function items of AUTOSET are shown as the following table:
Function Items
Acquisition Mode
Vertical Coupling
Vertical Scale
Bandwidth
Horizontal Level
Horizontal Sale
Trigger Type
Trigger Source
Trigger Coupling
Trigger Slope
Trigger Level
Trigger Mode
Display Format
RUN/STOP
Enable or disable the waveform sampling.
Notice:
Under the Stop state, the vertical division and the horizontal time base of the
waveform can be adjusted within a certain range, in other words, the signal
can be expanded in the horizontal or vertical direction.
When the horizontal time base equal to or is less than 50ms, the horizontal
time base can be expanded for 4 divisions downwards.
U-DISK COPY
Insert U disk into USB port, then press "COPY" key and you can save the waveform data into
the U disk. There is two formats available for choice: Vector format and Bitmap which the
Setting
Current
DC
Adjust to the proper division.
Full
Middle
Adjust to the proper division
Current
Show the minimum number of channels.
Current
Current
Mid-point Setting
Auto
YT
66
Average