Configuration Wizard; Adapter Selection - NEC N8100-1417F User Manual

Configuration Wizard

Use this wizard to configure a RAID system using the HDDs connected. The detailed explanation of
this feature is given in "Configuring Virtual Disk".

Adapter Selection

If optional RAID Controller (N8103-90) is installed in the server, you need to select an adapter
controlled by WebBIOS to configure each adapter. Clicking [Adapter Selection] on WebBIOS top
menu opens the [Adapter Selection] screen again.
Physical View / Logical View
If the virtual disk has been configured using the RAID Controller, DG (disk group) is displayed on
WebBIOS Top Menu. Clicking [Physical View] displays information for HDDs in DG. Clicking
[Logical View] displays virtual disk in DG.
Events
The Events screen is used to confirm the system events.
IMPORTANT:
116) does not support Events feature.
The Internal RAID Controller (equivalent to N8103-
Configuring Your Server 4-47