System Configuration - NetComm NTC-40WV User Manual

System Configuration

The System configuration page is used to specify an external syslog server and the TCP Keepalive settings.
TCP Keepalive can be used to ensure the WWAN connection does not disconnect due to inactivity.
OPTION
IP / Hostname [:PORT]
Log to file
Keepalive
Keepalive Time
Keepalive Interval
Keepalive Probes
Voice Call Function
Note: If the Voice Call Function option is changed, you must click Save and reboot the router for the changes to take
effect.
NTC-40WV HSPA+ M2M WiFi Router with Voice
76
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Figure 77 - System Configuration Items
The IP address and port of the external syslog server you would like logging information sent to.
Enables logging of high level communication between the router and the embedded module. The
log is saved to file and can be accessed on the Log page. See the
Enable or Disable the TCP Keepalive function.
The interval between the last packet sent and the first TCP keepalive packet being sent.
The time between subsequent TCP Keepalive packets.
The number of TCP Keepalive packets to send.
Allows you to enable or disable the voice calling function from the RJ-11 Telephone Cable Port.
Table 36 - System Configuration Items
DEFINITION
Log section for details.
www.netcommwireless.com