NetComm NTC-40WV User Manual page 20

Hspa+ m2m wifi router with voice
Hide thumbs Also See for NTC-40WV:
Table of Contents

Advertisement

Advanced Status Item Details
ITEM
Phone Module
Module Boot Version
Module PRID
System Uptime
Provider
Country Code
Network Code
Service Type
Coverage
Connection Status
IMEI
Frequency
Signal Strength (dBm)
Signal Quality (Ec/Io)
Received Signal Code Power (RSCP)
SIM ICCID
Primary Scrambling Code (PSC)
Location Area Code (LC)
Routing Area Code (RAC)
IMSI
Cell ID
Channel Number
MSISDN
NTC-40WV HSPA+ M2M WiFi Router with Voice
20
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
The phone module name, hardware and firmware version
The installed boot loader version of the phone module.
The Protocol ID of the phone module.
The time in minutes and seconds that the router has been up.
The current connection's 3G provider.
Each country has a unique code that helps to identify the 3G network.
Each 3G provider has a unique network code for network identification purposes.
The type of 3G service the current connection is using. Many networks use both a 3G
and 2G connection simultaneously.
The coverage type of 3G service the current connection is using.
The current status of the router's connection.
The International Mobile Equipment Identity number unique to each cellular network
device.
The frequency of the current connection.
The signal strength of the 3G connection measured in decibels.
A measurement of the portion of the received signal that is usable. This is basically the
signal strength minus the signal noise level.
The power level of the signal on the current connection's particular channel.
The Integrated Circuit Card Identifier of the SIM card used with the router, a unique
number up to 19 digits in length.
The Primary Scrambling Code for the current signal.
The ID of the cell tower grouping the current signal is broadcasting from.
The Routing Area Code is a subset of the Location Code and helps to identify the
group of or individual cell towers the current connection's is broadcasting from.
The International Mobile Subscriber Identity is a unique identification for the current 3G
connection.
A unique code that identifies the base station from within the Location Area where the
current 3g signal.
The channel number of the current 3G connection.
The Mobile Subscriber ISDN Number uniquely identifying a subscription in a GSM or a
UMTS mobile network.
Table 18: Status - Advanced Status Item Details
DEFINITION
www.netcommwireless.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hspa+ m2m wifi router

Table of Contents