NetComm NTC-40WV User Manual page 64

Send Ack. SMS to
This field defines the destination to send an acknowledgement message function to after the execution of a "Set" command.
If "Fixed Ack. SMS Number" is selected, the acknowledgement message will be sent to the predefined number in the "Fixed Ack.
SMS Number" field. If the SMS Sender Number is selected, the acknowledgement message will be sent to sender directly. The
default setting is to use "SMS Sender Number".
Fixed Ack. SMS Number
This field defines the destination number to which acknowledgement messages are sent after the execution of a "Set" command.
Send Error SMS for Get/Set/Exec Command
Enable or disable the sending of an error message resulting from the execution of a Get/Set/Exec command.
If disabled, the router does not send any error notifications after the execution of a Get/Set/Exec command. This function is
disabled by default.
Send Error SMS to
Select the destination of the error messages from the execution of a Get/Set/Exec command.
If "Fixed Number" is selected, any error messages will be sent to the predefined number in the "Fixed Error SMS Number" field. If
"SMS Sender Number" is selected, any error messages will be sent to the sender directly.
The default setting is to use "SMS Sender Number".
Fixed Error SMS Number
The destination number to which error messages from the execution of a Get/Set/Exec command should be sent.
Max. Diag. SMS Tx Limit
You can set the maximum number of acknowledgement and error messages sent when an SMS Diagnostics and/or Command is
executed. You can set the maximum limit on a per hour/day/week or month basis.
The default is to send a maximum of 100 messages per day.
You can check the current sent message count by looking next to the "Max. Diag. SMS Tx Limit" field. If the maximum number has
been exceeded, you can also reset sent the message counter by pressing the "Reset" button. The Total transmitted message count
resets after a reboot or at the beginning of the time frame specified.
Note: Times displayed are in UTC format.
For Example:
 If the time frame is set to "HOUR" and the current time is "04:30", then the counter will reset to zero at "05:00".
 If time frame is set to "DAY" and current date and time is "04:30" 17
"00:00" 18 of March.
th
 If time period is set to "WEEK" and current date and time is "04:30" Saturday, then the counter will reset to zero at
"00:00" on the coming Monday.
If time period is set to "MONTH" and current date and time is "04:30" 17

"00:00" 1 of April.
st
White List
A maximum number of 20 entries can be stored in the router.
If Authentication is enabled, any incoming Diagnostics/Command Execution SMS messages are processed only if the sender's
number exists in White List and the message password matches with the password specified in the White List.
One blank entry is shown by default and you can add or delete an entry by pressing the "+" or "–" button. The White List numbers
and passwords can be cleared by pressing the "Delete" button. To add an entry, simply enter the appropriate phone number and
password and click "Save".
Message Storage for Diagnostic Messages
Diagnostic messages (Diagnostic commands, acknowledgements and error notification messages) sent to remote destination are
stored in the Inbox/Outbox.
Security
In order to provide security for SMS command execution, it is recommended that all SMS commands be subject to successful
authentication against the White List as well as setting a password for each phone number entered. This prevents unauthorised or
accidental execution of SMS commands.
NTC-40WV HSPA+ M2M WiFi Router with Voice
64
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
of March, then the counter will reset to zero at
th
of March, then the counter will reset to zero at
th
www.netcommwireless.com