Ntc-40Wv Default Settings - NetComm NTC-40WV User Manual

NTC-40WV Default Settings

The following tables list the default settings for the NTC-40WV.
ADMIN MANAGER ACCOUNT
Username:
Password:
The admin manager account allows users to manage all settings of the router except functions such as Firmware
Upgrade, Mobile Broadband Connection Settings, Device Configuration Backup and Restore and Reset to Factory Default
Settings, which are privileged only to the Root manager account.
www.netcommwireless.com
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
LAN (MANAGEMENT)
Static IP Address:
Subnet Mask:
Default Gateway:
Table 8 - LAN Management Default Settings
WIRELESS (WIFI)
SSID:
Security:
Security Key:
Table 9 – WiFi Default Settings
For security purposes, it is recommended to change the Default SSID and Wireless Security Key.
admin
admin
Table 10 - Web Interface Default Settings
NTC-40WV TELNET ACCESS
Username:
Password:
Table 11 - Telnet Access
192.168.1.1
255.255.255.0
192.168.1.1
NetComm XXXX where XXXX are a
set of 4 random digits.
WPA2-PSK
Check your Wireless Security Card or
the device label on the bottom of the
NTC-40WV for your default SSID and
Security key.
ROOT MANAGER ACCOUNT
Username:
Password:
root
bovine
NTC-40WV HSPA+ M2M WiFi Router with Voice
root
admin
11