Table of Contents
Advertisement
System Configuration
Settings backup and restore
The settings backup and restore page is used to backup or restore the router's configuration or to reset it to factory defaults. In
order to view the settings page you must be logged into the web user interface as root using the password admin. The backup /
restore functions can be used to easily configure a large number of NTC-30WV router by configuring one router with your desired
settings, backing them up to a file and then restoring that file to multiple NTC-30WV routers.
Back up your router's configuration
Log in to the web configuration interface, click on the System menu and select Settings backup and restore.
If you want to password protect your backup configuration files, enter your password in the fields under Save a copy of current
settings and click on Save. If you don't want to password protect your files, just click on Save. The router will then prompt you to
select a location to save the settings file.
Note: The following conditions apply:-
It is NOT possible to edit the contents of the file downloaded; if you modify the contents of the configuration file in any way
you will not be able to restore it later.
You may change the name of the file if you wish but the filename extension must remain as ".cfg"
Restore your backup configuration
1.
In the web configuration interface click on the System menu and select Settings backup and restore.
2.
From the Restore saved settings section, click on Browse or Choose a file and select the backup configuration file on your
computer.
3.
Click Restore to copy the settings to the new NTC-30WV router. The router will apply these settings and inform you it will
reboot - click on OK.
Restoring the router's factory default configuration
Click the Restore defaults button to restore the factory default configuration. The router asks you to confirm that you wish to restore
factory default settings. If you wish to continue with the restoring of factory defaults, click OK.
Note: All current settings on the router will be lost when performing a restore of factory default settings. The device IP
address will change to 192.168.1.1 and the default username root and default password admin will be configured.
NetComm Wireless NTC-30WV 3G Outdoor Router with Voice
102
Figure 96 – Settings backup and restore
www.netcommwireless.com
Advertisement
Table of Contents
