Sms - NetComm NTC-40WV User Manual

SMS

The SMS pages are used to perform functions using the built-in SMS tools application. The SMS Tools application offers basic SMS
functionality such as sending a message, receiving a message and redirecting an incoming message to another destination. You
can also utilise this feature to read and change run-time variables on the router.
Basic functionality supported:
Ability to send a text message via a 3G network and store in permanent storage.

Ability to receive a text message via a 3G network and store in permanent storage.

Ability to forward incoming text messages via a 3G network to another remote destination which may be a TCP/UDP

server or other mobile devices.
Ability to read run-time variables from the device (e.g. uptime) and send result to a remote destination which may be a

TCP/UDP server or other mobile devices.
 Ability to change live configuration on the device (e.g. connection APN).
 Ability to execute supported commands (e.g. reboot).
Setup
General SMS functionality is enabled by default. You can open the Setup page in order to configure additional settings. To do this,
click on "Services", then "SMS" and then "Setup".
OPTION
SMS Enable/Disable
Messages / Page
Encoding Scheme
SMSC Address
Redirect to Mobile
Redirect to TCP
TCP Port to redirect
Redirect to UDP
UDP Port to redirect
Enable Remote Diagnostics
www.netcommwireless.com
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Figure 61 - SMS Function Setup
The option to switch off the SMS function.
Enter the number of SMS messages to display per page.
The encoding method used for SMS messages.
The short message service centre (SMSC) address is the number of your mobile brodband
SMS provider.
Forward incoming text messages to the remote destination defined.
Forward incoming text messages to the remote TCP destination defined.
The TCP port on which to connect to the remote destination on.
Forward incoming text messages to the remote UDP destination defined.
The UDP port on which to connect to the remote destination on.
Enable diagnostics to be performed by a specially crafted SMS message.
Table 28 -SMS Setup Settings
DEFINITION
NTC-40WV HSPA+ M2M WiFi Router with Voice
59