Table of Contents
Advertisement
System Configuration
The System configuration page is used to specify an external syslog server and the TCP Keepalive settings.
The TCP Keepalive can be used to ensure the WWAN connection does not disconnect due to inactivity.
OPTION
IP / Hostname [:PORT]
TCP Keepalive Settings
Keepalive
Keepalive Time
Keepalive Interval
Keepalive Probes
LEDs Power Save Settings
LEDs Timeout
LEDs Power Save Status
www.netcommwireless.com
Figure 76 - System Configuration Items
The IP address and port of the external syslog server you would like logging information sent to.
Enable or Disable the TCP Keepalive function.
The interval between the last packet sent and the first TCP keepalive packet being sent.
The time between subsequent TCP Keepalive packets.
The number of TCP Keepalive packets to send.
The length of time before the LEDs on the outside of the router turn off to save power.
The status of the LED power saving function.
Table 36 - System Configuration Items
DEFINITION
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
73
Advertisement
Table of Contents
