NetComm NTC-40WV User Manual page 24

Band / Provider
The band settings page enables you to select which frequency band you will use for your connection and enable you to scan for
available network operators in your area.
You may want to do this if you're using the router in a country with multi frequency networks that may not all support HSPA. You
can select the router to only connect on the network frequencies that suit your requirements.
Select a band from the "Change Band:" drop down list.
The following band settings options are available:
 WCDMA 900/2100
 WCDMA ALL
 GSM ALL
 GSM 900/1800
 All Bands
It is not necessary to change the default setting of "All bands" in most cases. When "All bands" is selected, the router attempts to
find the most suitable band based on the inserted SIM card.
You can also scan for available 3G service providers in your area by selecting "Manual" for the "Current Operator Selection Mode"
and then clicking the scan button.
A list of the detected 3G service carriers in your area will be displayed. Select the most appropriate 3G service from the list shown
and click "Apply".
The "Automatic" option is sufficient for most users. It will choose the most appropriate operator based on the inserted SIM card.
NTC-40WV HSPA+ M2M WiFi Router with Voice
24
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Figure 18 - Band / Operator Selection
Figure 19 - Manual Operator Selection
www.netcommwireless.com