Table of Contents
Advertisement
PPPoE
The PPPoE page is used to configure a transparent PPPoE connection. This can be used to provide a bridged connection.
To enable PPPoE mode, firstly ensure the "Auto Connect" is disabled in all the profiles on the "Connection" configuration page by
clicking on the "Internet Settings" menu followed by "Mobile Broadband" and then the "Connection" menu item on the right and
select each connection profile and disable the Auto Connection option and save the updated settings..
1.
Select "Enable" to enable PPPoE.
2.
Specify the APN supplied by your 3G provider.
3.
Specify a "Service Name". (Optional)
This is particularly useful if you have more than one PPPoE router or modem on a single Ethernet network.
Click "Save" to save your settings and enable PPPoE.
www.netcommwireless.com
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Figure 17 - PPPoE Settings
NTC-40WV HSPA+ M2M WiFi Router with Voice
23
Advertisement
Table of Contents
