Overview - NetComm NTC-40WV User Manual

Hspa+ m2m wifi router with voice
Hide thumbs Also See for NTC-40WV:
Table of Contents

Advertisement

Overview

Introduction
This document provides you all the information you need to set up, configure and use the NTC-40WV router.
Target Users
This document is intended for system integrators or experienced hardware installers who understand telecommunications
terminology and concepts.
Prerequisites
Before continuing with the installation of your NTC-40WV Router, please confirm that you comply with the minimum system
requirements below.
An activated 3G SIM card.
Device with a working Ethernet or wireless (802.11b/g/n) network adapter.
A Web Browser such as Internet Explorer, Mozilla Firefox, Opera, Safari etc.
Telephony Requirements
Standard analogue PSTN or cordless PSTN phone handset (DECT) with an RJ-11 port.
(ISDN phone handsets are not supported)
RJ-11 cable
Notation
The following symbols are utilised in this installation manual:
The following note requires attention
The following note provides a warning
The following note provides relevant information
NTC-40WV HSPA+ M2M WiFi Router with Voice
4
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
www.netcommwireless.com

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hspa+ m2m wifi router

Table of Contents