Table of Contents
Advertisement
The second step is to upload and install the main system software image. To do this, open your web browser (e.g. Internet
Explorer/Firefox/Safari) and navigate to
Click "Login" and type "root" in the Username and "admin" in the Password fields (without quotes). Then click on "Submit".
The banner at the top of the page should be different to show that the router is currently in recovery console mode.
To upload the main system software, click on "Application Installer" from the menu at the top of the page and then click on the
browse button and navigate to where the main system image upgrade file is located on your computer.
Once you have selected the recovery image file to use, click Upload to upload the file. You will then see a progress bar as shown in
the screenshot below. The upload has finished when the status bar reaches 100%.
When the upload has completed, the screen should refresh and show the file you have just uploaded. Click on the "Install" link to
the right of this.
Once you see "Done" shown as per the screenshot below, click on "Reboot" at the top of the page and then click the Reboot
button to restart the router.
The router will confirm you want to restart and then start up with the new system software loaded.
www.netcommwireless.com
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
http://192.168.1.1/
Figure 72 - Recovery Console Banner
Figure 73 - Recovery Console - Upload Firmware
Figure 74 - Recovery Console - Firmware Update
NTC-40WV HSPA+ M2M WiFi Router with Voice
73
Advertisement
Table of Contents
