NetComm NTC-40WV User Manual page 77

TR-069
The TR-069 (Technical Report 069) protocol is a technical specification also known as CPE WAN Management Protocol (CWMP). It
is a framework for remote management and auto-configuration of end-user devices such as customer-premises equipment (CPE)
and Auto Configuration Servers (ACS). It is particularly efficient in applying configuration updates across networks to multiple CPEs.
It uses a bi-directional SOAP/HTTP-based protocol based on the application layer protocol.
OPTION
Enable TR069 Service
ACS URL
ACS Password/Verify
ACS Password
Enable Periodic ACS
Informs
Keepalive Probes
Inform Period
Connection Request
Username
Connection Request
Password
Verify Password
www.netcommwireless.com
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Figure 78 - System - TR-069
This field provides the option to switch on or off the TR069 feature. ..
This field can be used to enter the domain name or IP address of the Auto Configuration Server
(ACS) you wish to use.
This field can be used to enter the password that the Auto Configuration Server (ACS) uses
Each session begins with the transmission of an Inform message from the ACS server. If able to
the CPE device responds with an Inform Response message. A periodic Inform message verifies
that each CPE device is capable of communicating and receiving updates from the ACS server
The number of TCP Keepalive packets to send.
Enter the time in seconds between periodic Inform messages. The maximum time span possible
is equivalent to more than 68 years.
Enter the TR-069 connection request username here.
Enter the TR-069 connection request password here.
Re-enter the TR-069 connection request password here and press the Save button.
Table 37 - System - TR-069 Details
DEFINITION
NTC-40WV HSPA+ M2M WiFi Router with Voice
77