System Monitor - NetComm NTC-40WV User Manual

Hspa+ m2m wifi router with voice
Hide thumbs Also See for NTC-40WV:
Table of Contents

Advertisement

System Monitor

The System Monitor page is used to configure the behaviour of the Periodic Piing monitor function.
The Periodic Ping Reset Monitor configures the router to transmit controlled ping packets to 2 specified IP addresses. Should the
router not receive responses to the pings, the router will reboot.
This works as follows:
1.
After every "Periodic Ping Timer" configured interval, the router sends 3 consecutive pings to the "Destination Address".
2.
If all 3 pings fail the router sends 3 consecutive pings to the "Second Address".
3.
The router then sends 3 consecutive pings to the "Destination Address" and 3 consecutive pings to the "Second Address"
every "Periodic PING Accelerated Timer" configured interval.
4.
If all accelerated pings in step 3 above fail the number of times configured in "Failures Before Reset", the router reboots.
5.
If any ping succeeds the router returns to step 1 and does not reboot.
Note: The "Periodic Ping Timer" should never be set to a value less than 60 seconds; this is to allow the router time
to reconnect to the cellular network following a reboot.
How to disable the Periodic Ping Monitor
To disable the Periodic Ping Reset Monitor simply set to Fail Count 0.
Note: The traffic generated by the periodic ping feature is counted as chargeable usage, please keep this in mind when
selecting how often to ping.
How to configure a Forced Reset
This facility is available by clicking on the "Services" menu followed by the "System Monitor" menu item on the right.
The router can be configured to automatically reboot after a period of time specified in minutes. While this is not necessary, it does
ensure that in the case of remote installations, it will reboot the router if some anomaly occurs.
The default value is 0 which disables the "Forced Reset Every" field. The maximum value is 65535 minutes.
www.netcommwireless.com
4Gon www.4Gon.co.uk info@4gon.co.uk Tel: +44 (0)1245 808295 Fax: +44 (0)1245 808299
Figure 59 - System Monitor Settings
NTC-40WV HSPA+ M2M WiFi Router with Voice
57

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hspa+ m2m wifi router

Table of Contents