Basic Sc Configuration On The Second Sc Board - Avaya G860 Installing And Operating

Avaya G860 Media Gateway
The software files are updated and commence operating automatically.
The following startup scripts are updated:
Remove startup script for Solaris™ SNMP daemon.
Add startup script for the software.
12. To perform the basic SC configuration on the second SC board, go to 'Updating
the Basic SC Network Configuration' on page 78.
Note: For Redundant systems with two SC boards, repeat the procedures details
starting from 'Updating the Basic SC Network Configuration' on page
the second SC board.
9.5.2.2

Basic SC Configuration on the Second SC Board

To perform the basic SC configuration on the second SC board,
take these 3 steps:
1. Follow the configuration scripts shown in the example below.
Example of Part 1 of the basic configuration process:
Entered text is shown in bold and the IP addresses are assumed for the purposes of
this example. Note the keyboard shortcuts detailed in the middle of the Example
below.
~> /install.pl
Found uncompressed Avaya installation package...
Verify installation package integrity...
-------------------------------------------------
SC software installation & basic configuration
-------------------------------------------------
1 - Update SC network parameters.
2 - Install and configure.
3 - Change installed configuration.
4 - Copy configuration from Primary SC.
5 - Uninstall SW.
0 - Quit.
Choose (0-5) : 4
------------------------------------------------
Verify that Primary SC 10.7.13.80 responds to ping...
10.7.13.80 is alive
-------------------------------------------------------------------
-
Configuration will be copied from Primary SC 10.7.13.80 via SSH.
84 Installation & Operation Manual
78 for