Redundant Configuration - Installing The Sc Software - Avaya G860 Installing And Operating

Avaya G860 Media Gateway
~> cd <directory of files>
2. Use the dir command to identify the installation package files
~> dir
sc_software.tar.gz
3. Use the ftp command to access the sun system on the SC board. Enter the
default host name and IP address of the SC board provided by Avaya.
~> ftp <sc default IP address>
Connected to sc.
220 sc1 FTP server (SunOS 5.8) ready.
Name : root
331 Password required for root.
Password: root
230 User root logged in.
ftp> ascii
200 Type set to A.
ftp> put install.pl
200 PORT command successful.
150 ASCII data connection for install.pl
226 Transfer complete.
42477 bytes sent in 0.0082 seconds
ftp> bin
200 Type set to I.
ftp> put sc_software.tar.gz
200 PORT command successful.
150 Binary data connection for sc_software.tar.gz
226 Transfer complete.
46615040 bytes sent in 5.9 seconds
ftp> put <proper cfg file name>
226 Transfer complete.
ftp> quit
14.2.5

Redundant Configuration - Installing the SC Software

To install the SC software, take these 10 steps:
1. Follow the installation scripts shown in the example below.
2. Log on using the default username: root and password: root.
3. Enter the /install.pl command. The software installation & basic configuration
menu appears.
136 Installation & Operation Manual