To Decode an ini file, follow these 4 steps:
1.
Prior to the decoding process, the user should prepare the appropriate encoded
ini file either by uploading from the board or by using the encoding process on an
exiting ini file.
2.
Execute DConvert.exe and click the Process Encoded ini file(s) button.
3.
In the Decode ini File(s) area, click Select File(s) and select the aen file to be
decoded. (This automatically designates the output file as the same name and
path, but with the extension, _dl.ini.
4.
Click the Decode File(s) button. The decoded file is generated and placed in the
same directory as shown in the Output File field. A message box informing you
that the operation was successful indicates that the process is completed.
Note:
18.1.6
Process Coder Table File(s)
Coder description files are used to define coders properties for the control protocol in
use.
To Encode an ini file, take these 6 steps:
1.
Create a coder table file. An example is shown in 'Coder Table File' on page
Error! Bookmark not
2.
Run DConvert.
3.
Select the 'Process Coder Table file(s)' menu option from the main menu.. The
Coders screen appears as shown in the figure below.
The decoding process verifies the input file for validity. Any change made to
the encoded file causes an error and the decoding process is aborted.
defined..
Figure 53: Process Coder Table Screen
18. Appendix - Utilities
Issue 1 October 2007 197