Process Encoded/Decoded Ini File(S) - Avaya G860 Installing And Operating

Avaya G860 Media Gateway
11. Click Make File(s) button. The Progress bar at the bottom of the window is
activated. The dat file is generated and placed in the same directory as shown in
the Output File field. A message box informing you that the operation was
successful indicates that the process is completed.
18.1.5

Process Encoded/Decoded ini File(s)

The ini file can be both encoded and decoded using DConvert. Encoding usually
takes place before downloading an ini file to the board while decoding usually takes
place after uploading an ini file from the board.
To Encode an ini file, take these 4 steps:
1. Prior to the encoding process, the user should prepare the appropriate ini file
either by uploading from the board or by constructing one (refer to 'Adding the
Auxiliary Files' on page
Execute DConvert.exe and click the Process Encoded ini file(s) button. The
Encoded ini file(s) window appears.
2. In the Encode ini File(s) area, click the Select File... Button. A Browse window
appears.
3. Navigate to the desired location and select the ini file to be encoded. (This
automatically designates the output file as the same name and path, but with the
aen extension.
Note: The Password field is to be implemented in a future version.
4. Click the Encode File(s) button. The encoded file is generated and placed in the
same directory as shown in the Output File field. A message box informing you
that the operation was successful indicates that the process is completed.
The encoded ini file can be loaded using the regular ini file procedure. To upload a
file from a device, use the EMS (refer to 'Adding the Auxiliary Files' on page
Bookmark not
196 Installation & Operation Manual
Error! Bookmark not
Figure 52: Encoded ini File(s) Screen
defined.).
defined.).
Error!