Board Assembly Order - Avaya G860 Installing And Operating

Pin Number
2
3
4
5
6
7
8
2.7

Board Assembly Order

For a system configuration with less than the full complement of Media Gateway
boards, the board assembly should follow the tables below. Any slot with no board
assigned to it must be covered with a blank panel.
For a TPM Redundant configuration, Slot 10 contains the Redundant TPM board and
the order for inserting the rest of the TPM boards begins in Slot 9.The fourth (final)
TPM board is inserted in slot 7.
Note 1:
Note 2:
Table 20: TPM System Configuration Board Assembly - View 1
Slot # Front Board
Slot 1 SC
Slot 2 SC
Slot 3 ES/6600
Slot 4 ES/6600
Slot 5 Blank Panel – Air Baffle
Slot 6 Blank Panel
Slot 7 TPM #4
Slot 8 TPM #3
Slot 9 TPM #2
Slot TPM #1 (Simplex Configuration
10
or
Table 19: ES/6600/RTM Port Pin Outs
For all TPM system configuration board assembly options, Slot 5 must
retain the blank panel with air baffle and Slot 6 must retain the blank panel.
Redundant TPM board requires the TPM/RTM/Redundant.
2. Hardware Overview
Signal Name
Rx-
Tx+
-
-
Tx-
-
-
Rear Board
SA/RTM
SA/RTM
ES/6600/RTM
ES/6600/RTM
Blank Panel
Blank Panel
TPM/RTM
TPM/RTM
TPM/RTM
TPM/RTM
or
Issue 1 October 2007 41