Transporting The Machine - Canon MP980 series On-Screen Manual

Transporting the Machine

> Appendix
Advanced Guide
Transporting the Machine
When relocating the machine, pack the machine using the original packing materials.
If you do not have the original packing materials, pack the machine carefully using protective material
and place it inside a sturdy box.
Caution
Do not transport or store the machine slanted, vertically, or upside-down, as the ink may leak and
damage the machine.
1.
Turn the machine off.
2.
Confirm that the Power lamp is off and unplug the machine.
Important
Do not unplug the machine while the Power lamp is lit or flashing blue, as it may cause
malfunction or damage to the machine, making the machine unable to print.
3.
Retract the Paper Support and the Output Tray Extension, close the Paper Output
Tray, then close the Operation Panel.
4.
Disconnect the printer cable from the computer and from the machine, and then
disconnect the power plug from the machine.
5.
Use adhesive tape to secure all the covers on the machine to keep them from
opening during transportation. Then pack the machine in the plastic bag.
6.
Attach the protective material to the machine when packing the machine.
Important
Make sure to lock the Scanning Unit (Cover) by sliding the Scanner Lock Switch to the Lock
).
position (
Pack the machine with the Print Head and ink tanks left installed in the machine.
Note
Clearly label the box as "FRAGILE" or "HANDLE WITH CARE".
> Transporting the Machine
Page 884 of 947 pages
Page top