Output Settings - Canon MP980 series On-Screen Manual

Output Settings

>
Advanced Guide Scanning
Output Settings
Output Settings
Output Settings allows you to set the following items:
Output Resolution
Select the resolution to scan at.
The higher the resolution (value), the more detail in your image.
Select a resolution from the options displayed by clicking the button, or enter a value within the range
of 25 dpi to 19200 dpi (in 1 dpi increments).
Note
Resolution
See " " for details.
Output Size
Select an output size.
Select Flexible to set custom sizes or select a size for printing or displaying. Select Add/Delete... to set
custom size and save it as a new output size option.
Flexible
When scanning paper/photos
You can specify the output resolution and scale, and adjust the cropping frame. When no cropping
frame is displayed, the entire Preview area will be scanned. When a cropping frame is displayed,
the portion within the cropping frame will be scanned.
When scanning film
In thumbnail view, each frame is scanned individually. To display cropping frames, drag the
mouse over a thumbnail or display the whole film image by clicking
cropping frame is displayed, the portion within the cropping frame will be scanned.
Note
To enlarge/reduce the scanned image, enter values into Width and Height in Output Settings
or specify a value (by 1%) for %. The maximum value available for % depends on the Output
>
Scanning with Other Application Software
> ScanGear (Scanner Driver) Screens
(Thumbnail). When a
Page 626 of 947 pages
>