Canon MP980 series On-Screen Manual page 847

Image Becomes Too Dark or Too Bright When a Cropping Frame Is Moved,...
>
Advanced Guide Troubleshooting
When a Cropping Frame Is Moved, Enlarged or Reduced
Image Becomes Too Dark or Too Bright When a Cropping
Frame Is Moved, Enlarged or Reduced
Check: Follow these steps from the Advanced Mode tab of ScanGear
(scanner driver).
1.
Click Preview.
The preview images are refreshed.
When the whole film image is displayed, click
thumbnails.
2.
Select the frame you want to correct the colors of.
3.
Click Apply in the Apply the tone value to all frames section.
If the Apply the tone value to all frames section is not displayed, click
/Tone Settings.
4.
Create a cropping frame and click Scan.
Scanning starts.
> Problems with Scanning/Printing Film
(Whole Film Image) on the Toolbar to display the
> Image Becomes Too Dark or Too Bright
of Exposure
Page top
Page 847 of 947 pages