Canon MP980 series On-Screen Manual page 35

Printing Photos from a Film
> Printing Photos from Printed Photos or Film
Contents
Printing Photos from a Film
Print photos from a 35 mm film strip or slides.
This section describes the basic procedure, using the print setting for printing photos onto 4"x 6" / 10 x
15 cm photo paper from commonly used color negative film strip as an example.
You need to prepare:
35 mm film strip
Paper for printing. See Media Types You Can Use
Note
Film strip is a series of six exposures after regular development, and slide is each exposure of film
mounted on a frame.
This procedure cannot save scanned images. If you want to save the scanned image data, use a
computer to scan.
Refer to the on-screen manual:
Do not scan different types of films (Color negative film, B&W negative film, Color positive film, and
Mount (for slides)) at the same time.
1.
Prepare for printing photos from a film.
Turn on the power.
(1)
Operation Panel
See
Load paper.
(2)
Loading Paper
See
Here we load 4" x 6" / 10 x 15 cm photo paper in the Rear Tray.
Open the Paper Output Tray gently, and open the Output Tray Extension.
(3)
Select Film print
(4)
Make sure that Color negative film
(5)
> Printing Photos from a Film
.
Advanced Guide .
.
.
on the
HOME screen, and press the OK
Advanced Guide
is selected, and press the OK button.
Page 35 of 947 pages
Troubleshooting
button.