Canon MP980 series On-Screen Manual page 697

About PictBridge Print Settings
(May not be selected depending on the device.)
Trimming
Default (Off: No trimming), On (follow camera's setting), Off
Settings on the Machine
You can change the PictBridge print settings from the PictBridge print settings screen. Set the print
settings to Default on the PictBridge compliant device when you want to print according to the
settings on the machine.
This section describes the procedure to display the PictBridge print settings screen. For setting
items, see PictBridge print settings
1.
Make sure that the machine is turned on.
2.
Settings on the HOME screen, then press the OK button.
Select
3.
Device settings, then press the OK button.
Select
4.
Select PictBridge print settings, then press the OK button.
The PictBridge print settings screen is displayed.
.
Page 697 of 947 pages
Page top