Canon MP980 series On-Screen Manual page 504

Scan Settings Dialog Box (Film)
>
Advanced Guide Scanning
Settings Dialog Box (Film)
Scan Settings Dialog Box (Film)
The Scan Settings dialog box opens when you click Specify... in the Scan/Import window.
In the Scan Settings dialog box, you can make advanced scan settings.
Film Type
Select the type of film to be scanned.
Important
Film may not be scanned correctly when Auto is selected. In that case, select the type of film and
scan again.
Note
To scan black and white film, it is recommended that you select Black and White Negative Film or
Black and White Positive Film.
Document Size
Select the size of the film to be scanned.
Note
To scan mounted negative slides, scan from the Advanced Mode tab of ScanGear (scanner
driver).
Scanning Film in Advanced Mode
Scanning Resolution
Select the resolution at which to scan film.
Resolution
Unsharp Mask
Select this checkbox to emphasize the outline of the subjects and sharpen the image.
Preview before scanning
Select this checkbox, then perform a scan to display preview images before scanning. In the preview
screen, click Cancel to return to the MP Navigator EX screen, or click Scan to start scanning the
selected frames.
Defaults
Restore the default settings.
> Scanning with the Bundled Application Software > MP Navigator EX Screens
> Scan
Page top
Page 504 of 947 pages