Canon MP980 series On-Screen Manual page 679

Printing from Film (MP980 series)
> Printing on DVD/CDs
Advanced Guide
Printing from Film (MP980 series)
Print an image on a film (35 mm negative/positive (strip/slide)) onto a printable DVD/CD.
Important
You cannot print on 8 cm DVD/CDs.
Note
If printing is misaligned, adjust the printing position. For information on how to adjust it, see
Adjusting the Print Area
1.
Make sure that the machine is turned on.
2.
DVD/CD label print on the HOME screen, then press the OK button.
Select
3.
Select
The print area setting screen is displayed.
4.
button to select Outer circle or Inner circle and use the
Use the or
button to change the print area.
5.
Press the OK button.
Note
Measure the outer and inner diameters of the printing surface of the printable DVD/CD and
make sure you set a value smaller than the measured value for the outer diameter, and a value
larger than the measured value for the inner diameter.
For information on printable discs, contact their manufacturers.
6.
Use the or button to select Recommended DVD/CD or Other DVD/CD, then
press the OK button.
Note
If your medium is the recommended DVD or CD, specify Recommended DVD/CD for the
suitable density printing. If not, specify Other DVD/CD.
7.
Select the type of film.
Note
You can select Color negative film, B&W negative film, Color positive film, or Mount (for slides).
8.
Load the film on the Platen Glass.
Press the Color
button to scan the film.
Important
Do not see the light source directly while scanning is in progress.
9.
Use the or
Note
If
appears on the preview screen, the photos may be not scanned properly. Press the
> Printing on the Label Side of DVD/CDs
.
From film, then press the OK button.
button to select the photo to print, then press the
> Printing from Film (MP980 series)
or
button.
OK
Page 679 of 947 pages