Canon MP980 series On-Screen Manual page 849

Frames Are Not Detected Correctly
4.
Click (Crop) and adjust the cropping frame to the desired size.
5.
(Enlarge/Reduce) and right-click on the image.
Select
The Preview area is reduced and the whole film image is displayed.
6.
Select unnecessary frames and click
The cropping frames are deleted. You can also delete the cropping frames by pressing the Delete
key.
7.
Click Scan.
Scanning starts.
Check 3: Check if there are frames that are not cropped even when the
whole film image is displayed.
On the Advanced Mode tab of ScanGear (scanner driver), click
frames for all frames according to the film size. If the frame you want to scan is not cropped correctly,
adjust the cropping frame. See the procedure in Check 2 to adjust the cropping frame.
(Remove Cropping Frame).
(Thumbnail) to display the cropping
Page 849 of 947 pages
Page top